New Holland CR9000 Twin Rotor® Combines
The NEW CR9000 Twin Rotor® combines are the result of over 30 years of rotor technology and field experience. Year after year, the impressive grain quality and harvesting capacity of New Holland combines confirms the effectiveness of the Twin Rotor design. New Holland’s two rotors deliver 36% to 40% higher centrifugal force than competitive-brand combines for more efficient threshing and separating, while proven systems for cleaning and gentle grain handling compound that incredible capacity.

Models:
CR9040 305 hp, 315 bu. tank capacity
CR9060 340 hp, 315 bu. tank capacity
CR9070 400 hp, 350 bu. tank capacity

New Holland CX8000 Super Conventional Combines
The NEW CX8000 Super Conventional combines are the super choice for fast harvesting! Backed by 100 years of factory production knowledge and more than 40 years of conventional combine experience, CX8000 combines deliver super-fast threshing and separation, less grain damage and a new level of convenience and comfort.

Model:
CX8070 322 hp, 295 bu. tank capacity
CX8080 350 hp 330 bu. tank capacity
CX8090 400 hp 330 bu. tank capacity

New Holland Corn Header for CR and CX Combines
The 98C corn header is smooth, fast and durable. It gets under downed corn, picks it up better than the competition and takes in less trash for more combine capacity.

Models:
98C 6-row available in 30, 36 and 38 in.
98C 8-row available in 30, 36 and 38 in.
98C 12-row available in 20, 22 and 30 in.

New Holland 99C Chopping Corn Header for CR and CX Combines
The 99C chopping corn header features two chopping knives for each row unit for optimum chopping and distribution of crop residue—ideal for no-till farming. Automatic controls maximize your control and minimize fatigue. Choose from three versions:

Models:
99C 6-row available in 30-in. row spacing
99C 8-row available in 30-in. row spacing
99C 8-row folding available in 30-in. row spacing

New Holland Draper Headers for CR and CX Combines
The 92C rice belt header is 25 feet wide and features your choice of single or double knife drive. The 92C is a two-deck, center-mounted header that features a single-feed belt, a large-diameter full-floating auger, and extra-long retractable fingers.

Models:
92C Rice Belt Header available in widths 25 and 30 ft.
94C Grain Belt Header available in widths 25, 30, 36, 40 and 42 ft.

New Holland Cutterbar Auger Headers for CR and CX Combines
The 72C rigid cutterbar auger header is available in 20-, 25- and 30-foot widths. The smallest model is equipped with a single-knife drive, while the two larger models feature twin-knife drives.
 

Models:
72C Rigid Cutterbar Header available in widths 20, 25 and 30 ft.
74C Flexible Cutterbar Header available in widths 20, 25, 30 and 35 ft.

New Holland Flex Draper Header for CR and CX Combines
The 84C flex draper headers is available in 30- and 36-foot widths and is ideal for in-ground harvesting. Draper design provides smooth, even "head first" feeding in the toughest conditions and increases combine capacity up to 20%. A suspended floating head with flexing wing sections provides 7.5 inches of free vertical and 4.8 degrees of free lateral flotation. The 84C can easily be locked for rigid off-ground direct cutting.

Models:
84C available in widths 30 and 36 ft.

New Holland 88C Floating Cutterbar Draper Header for CR and CX Combines
The 88C floating cutterbar draper headers are the ideal match for high-capacity New Holland combines harvesting on-ground crops. Available in widths from 30 to 45 feet, the 88C hugs ground contours to get every bit of crop and provides consistent, head-first material flow from field to feeder house.

Models:
88C available in widths 30, 36, 42 and 45 ft.

New Holland Windrow Pick-up Header for CR and CX Combines
The 76C windrow pick-up header is available in 12, 14 and 16-foot widths and two designs: SwathMaster™ Belt Pick-up and Rake-Up™ Pick-up.
SwathMaster™ Belt Pick-up
SwathMaster™ Belt Pick-up uses four individual rollers, a pickup belt that gently lifts crop into the header and a draper belt that carries the crop to the auger and into the feeding area. Choose a model with both front and rear windguard and hydraulic adjustment on the front windguard, or choose a model with a rear windguard with mechanical adjustment.

Models:
76C available in widths 12 (grass seed only), 14 and 16 ft.

FR Self-Propelled Forage Harvesters
If you have a lot to chop, FR Series self-propelled harvesters have a voracious appetite. These are the biggest choppers in the world, offering a new level of power, capacity and comfort. Five new models range from 424 to 824 horsepower—the most horsepower you’ll find anywhere for maximum capacity.

Models:
FR9040 424 hp, 16 or 24 knives, 4 feedrolls, 34.5 in. cutterhead width
FR9050 500 hp, 16 or 24 knives, 4 feedrolls, 34.5 in. cutterhead width
FR9060 576 hp, 16 or 24 knives, 4 feedrolls, 34.5 in. cutterhead width
FR9080 685 hp, 16 or 24 knives, 4 feedrolls, 34.5 in. cutterhead width
FR9090 824 hp, 16 or 24 knives, 4 feedrolls, 34.5 in. cutterhead width

New Holland FX Self-Propelled Forage Harvesters
Peak quality silage at peak speed
As a custom harvester or large dairy operator, you’ll appreciate how New Holland FX harvesters let you work faster—in all crop conditions—with added convenience.

Models:
FX40 460 hp, 4, 6, 8 or 12 knives, 4 feedrolls, Beveled reversible knives cutterhead
FX50 515 hp, 4, 6, 8 or 12 knives, 4 feedrolls, Beveled reversible knives cutterhead
FX60 571 hp, 4, 6, 8 or 12 knives, 4 feedrolls, Beveled reversible knives cutterhead

New Holland Pull-Type Forage Harvesters
When it comes to rugged, high-capacity forage harvesters, no one builds them like New Holland. That's why New Holland continues to offer America's best-selling forage line. Choose from three models:

Models:
790 9 ft. 6 in. widths, 1/8 in to 1 1/2 in. cut lengths
FP230 10 ft. 8 in. widths, 3/16 in to 1 5/16 in. cut lengths
FP240 10 ft. 8 in. widths, 3/16 in. to 1 5/16 in. cut lengths

New Holland Crop-Chopper®
Chops a variety of crops Dampness and morning dew won't slow down chopping when you own a multi-purpose New Holland 38 Crop-Chopper®. It's perfect for chopping standing grass crops for daily green feeding. It's also great for making bedding from cornstalks or straw, or shredding and spreading cornstalks for mulch. And, it mows weeds, clears small brush and stubble, and tops potatoes and beets. It even clips pastures and waterways, chops flax and cleans up rice stubble.

New Holland Forage Blowers
Center-fill silos over 100 feet tall
The high-capacity F62B forage blower is engineered to quickly center-fill tall silos and make it easy to keep pace with harvesters and wagons. An improved design means vibration and noise are reduced and makes filling your silos less of a chore. And, the F62B is easy to transport and set up.

Models:
F62B 540 rpm, 37 in. hopper width, 60 in. blower fan, 100 ft. + silo height